DEVELOPMENT OF RESERVOIR OPERATION FOR BATANG AI HYDROELECTRIC PROJECT
DOI:
https://doi.org/10.33736/jcest.303.2016Abstract
Batang Ai Hydroelectric Project is meant to generate electricity. The Batang Ai Dam has a maximum capacity to generate around 108MW when it is fully operational. Efficient reservoir operation should be carried out very carefully in order to provide reliable water supply for power generation and water demand. The research of this project is to review the Batang Ai Dam storage conservation for the reservoir operation by using storage conservation simulation. The simulations are carried out with various outflow conditions using the principle of the storage equation. Lastly, the results from the simulation show that with proper regulation of the reservoir outflow, the Batang Ai Hydroelectric Project reliability to provide continuous power supply without shortage in water supply is assured.
References
Verhaeghe, R.J. (1997). Reservoir Planning and Operation systems analysis simulation evaluations. The Netherlands: IHEDELFT.
Reservoir Operation (2007). Retrieved October 28, 2010, from 8 Brillante St: http://jcquilala.wordpress.com/2007/07/30 /reservoir-operation/.
Ngo, L. L. (2006, October). Optimising reservoir operation: A case study of the HoaBinh reservoir, Vietnam. Retrieved October 24, 2010, from http://www.fiva.dk/doc/thesis/ngo.pdf
Gilmore, A.F. (1996). A Study of Optimization of Reservoir Operation of Colorado River. Thesis of B.A., University of Colorado.
Wurbs, R.A., and James W. P. (2002). Water Resources Engineering. United States of America: Prentice-Hall, Inc.
Downloads
Published
How to Cite
Issue
Section
License
During the manuscript submission process, the corresponding author, on behalf of all authors, will be asked to agree to the terms of the Open Access Publishing Agreement by checking the designated agreement box (see Copyright & Licensing for more information).
Open Access Publishing Agreement
1) By agreeing to these terms, the author(s) retain full copyright and grant UNIMAS Publisher the right of first publication. The author(s) also grant UNIMAS Publisher permission to reproduce, recreate, translate, extract, or summarize, and to distribute and display in any forms, formats, and media. The author(s) can reuse their papers in their future printed work without first requiring permission from UNIMAS Publisher, provided that the author(s) acknowledge and refer to the publication in the Journal.
2) The author(s) agree that their articles published under UNIMAS Publisher are distributed under the terms of the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0), which permits unrestricted use, distribution, and reproduction in any medium, for non-commercial purposes, provided the original work of the author(s) is properly cited.
3) The author(s) are responsible for ensuring their submitted work is original and does not infringe any existing copyright, trademark, patent, statutory right, or proprietary right of others. The corresponding author has obtained permission from all co-authors prior to submission to the journal. Upon submission of the manuscript, the author(s) agree that no similar work has been or will be submitted or published elsewhere in any language. If the submitted manuscript includes materials from others, the authors have obtained permission from the copyright owners.
4) By agreeing to this statement, the author(s) declare that the research which they have conducted complies with the current laws of the respective country and UNIMAS Journal Publication Ethics Policy. Any experimentation or research involving humans or the use of animal samples must obtain approval from the Human or Animal Ethics Committee in their respective institutions. The author(s) agree and understand that UNIMAS Publisher is not responsible for any compensational claims or failure caused by the author(s) in fulfilling the above-mentioned requirements. The author(s) must accept the responsibility for releasing their materials upon request by the Chief Editor or UNIMAS Publisher.
5) The author(s) should have participated sufficiently in the work and ensured the appropriateness of the content of the article. The author(s) should also agree that they have no commercial attachments (e.g., patent or license arrangement, equity interest, consultancies, etc.) that might pose any conflict of interest with the submitted manuscript. The author(s) also agree to make any relevant materials and data available upon request by the editor(s) or UNIMAS Publisher.
